MAINTENANCE MANAGER - S. Carolina - BSME or BSCHE.
10+ years maintenance supervision experience. This position is responsible for providing
leadership and direction to the maintenance department to support the on-goin cost effective
operations at a chemical plant. Responsibilities include, maintaining process equipment while
controlling costs, promoting and maintaining safety, environmental compliance, and quality. This
position will also act as a facilitator, directing the activities of 1 Maintenance Planner,
1 I&E Engineer, 1 Maintenance Clerk, 3 Maintenance Craft Mechanics, and 1 Instrumentation
Technician. This position is responsible for coordination of the maintenance department and
interacts with the safety, quality assurance, environmental and production departments to
maintain production, and safety and environmental performance for the entire facility. A
background in Process Safety Management (PSM) and Mechanical Integrity is a must.
Salary: to low $90's Job Number: 2627-A
PROJECT ENGINEER - Tennessee - BSCHE with 5-10 years
applicable experience. GPA of 3.0 or greater required. Will be responsible for the coordination
of subcontractors in performing identified work scopes for assigned projects; eqiuipment development,
specification and selection with knowledge in the area of piping, pumps, and valves; review designs
and operations and recommend changes that will improve cost, efficiency and safety. Responsible for
costing and scheduling of assigned projects to insure projects are completed on time with within budget
specifications.
ESTIMATOR - Houston, TX - 5-10 years pipe and
structural steel extimating experience. Petrochemical or industrial gas experience required
Cryogenic gas processing experience is a plus; Ability to read and interpret P&IDs and
fabrication drawings; Ability to perform conceptual and working drawing material take-offs.
Must be detail oriented and organized. Ability to estimate an entire project and multi-task.
Familiar with MS Office software with strong Excel skills. AutoCAD or similar software
experience is a plus. Ability to work quickly and accurtely to maintain bid deadlines. Ability
to work overtime as required. Conceptual Estimating is desired. Bachelors degree is a plus.
ANALYTICAL SERVICES MANAGER - East Tennessee - BSMS Chemical Engineer or Chemistry.
Seeking over 10 years experience in an analytical laboratory supporting an inorganics processing facility and performs environmental
compliance monitoring. Responsible for Wet Chemistry, Rad-Chemistry Lab, Spectrographic, Process Control, Physical Testing and
approximately 70 personnel. Manages the overall operations of the laboratory to provide analytical services for operations, outside
customer contracts and regulatory rerquirements in a cost effective and timely manner. Insure integrity of laboratory programs to
meet contractual, regulatory and company requirements. Develop resource loaded staffing plans to efficiently utilize staff to meet
technical requirements of current and future operations. Responsible for the development of annual operating expenses and capital
equipment budgets also, prepare laboratory cost proposals for customer inquires based on technical requirements and applicable regulatory
compliance or process control requirements.
STRUCTURAL ENGINEER - Texas - - BSCE, PE certification a must, with 8+ years
hands-on Structural Engineering experience. Must be familiar with national design codes and standards (ASIC, ACI, ASCE-7,
IBC and UBC). Autocad experience with pipe stress analysis a plus. Responsible for analysis and design of structural
steel frames. Coordinate and lead design and drafting activites to produce structural calculations, specifications and
detail drawings. Experience with the analysis and design of structural steel frames, weldments, foundations, and pipe
supports. Experience with STAAD structural software.
CONSTRUCTION MANAGER - Bay Area, California -Bachelor degree preferred with 10+ years
hands-on capital improvement experience as a Construction Manager in heavy industrial facilities - Ideally Field Erected
Pressure Vessel construction; LNG, Utilities, etc. Experience in gas processing, cryogenic systems. liquefaction, heat
exchangers, cold boxes preferred. Assist in the identification, selection and contracting of all resources required for
the execution and management of construction activities. Lead all construction and commissioning activities, including
handover to operations.
STAFF ENGINEER - Georgia - BSME with 5-7 years in pipeline expertise with
specific experience in valves and centrifugal pumps. This position will require experience in design, troubleshooting
and technical support for pipeline operations including tank farms, deliver/injection facilities and/or refinery,
chemical plants. Background in project management, maintenance and construction a strong plus.
FIELD PROJECT MANAGER - Georgia and Texas - 5+ years pipeline project
management experience. Project emphasis will be on pipeline integrity, maintenance and construction. BSME, BSCE, other
engineering disciplines will be considered.
SENIOR PROJECT MANAGER - Georgia - BSCE, PMP desired. Ideal
candidate will have 15-20 years Project Engineering/Management experience in the O & G or Pipeline Industry.
Project responsibility should be in the $20 - 40MM project range having had responsibility for the 'Total'
project - start to end including administrative responsibility of associated personnel.
ELECTRICAL ENGINEER - Georgia - BSEE with 4 to 8 years power
related electrical design and troubleshooting experience involving large motors - to 5000hp, switchgear,
medium voltage - 4000V applications, pumps, and instrumentation.
ELECTRICAL DESIGN ENGINEER - PIPELINES, Georgia -
BS Electrical Engineering. 5 yr+ Pipeline/Oil/Gas Industry experience, ideally
possessing an Intern (EIT) Certification. Responsible for engineering design and technical
analysis involving petroleum pipeline equipment to include conducting voltage drops, Conduit/cable
sizing, Termination design, Fault calculations, Analysis for motor sizing / interchange, Energy optimization
calculations, Electrical cost estimating, Project inspections, and Vendor bid evaluations.
10-20% travel.
IT/ELECTRONIC CONTROLS ENGINEER, Georgia -
BS Computer Engineering, EE, EET or related. Must have 3-7 years design experience with
programmable Logic Controllers to include heavy Allen Bradley programming experience. A good
understanding of PLC network communications & protocols, and of electrical/electronic
components, and possess vendor/contractor management experience with solid presentation
skills. Also MS Office computer skills is essential.
PROJECT MANAGER - PETROLEUM TANKS / PIPELINE; MARYLAND - BS Engineering.
3-5+ years O&G Pipeline related Project Engineering/Management experience in the area of Tanks (petroleum preferred)
"API 653" certification desired. Will be managing projects from conception through completion - to include costs,
material procurement, scheduling and implementation. Responsible for preparation of annual capital and operating budgets.
Also, development of Tank Preventative Maintenance plans, and analysis of data to determine Tank repair and floor
replacement requirements.
PROJECT/MAINTENANCE ENGINEER - BSME Preferred; Engineering Degree
Essential. 3-10 years maintenance or plant project engineering experience; supervision nice,
but not essential. Most Projects are less than $2MM. This is a Fortune 500 employer with
multiple plants who is seeking sharp, well organized engineers to grow within their
organization. Must have chemical or heavy industry plant experience, be able to organize and
handle a project, oversee installation/start-up, support maintenance, etc. Lots of visibility
in a small plant.
PROCESS ENGINEER, Smoky Mountains - BSCHE 2+ years plant
process experience desired. Inorganics, chlor/alkali process/process design is preferred.
Duties will include plant debottlenecking and process improvement.
Salary: $70's+ Job Number: 20980-C
Salary: $80's Job Number: 2668-C
Salary: to low $100's Job Number: 20980-A
Salary: Competitive Job Number: 2668-A
Salary: to $90's Job Number 2668-B
Salary: $80's Job Number: 2656-G
Salary: to $90's Job Number: 2656-F
Duties include assembling and leading cross-functional project teams to aligns with project business purposes;
monitors the project performance of activities, completion of necessary documentation, personal conduct, work
ethics, and interface with others; taking corrective action as needed.
Salary: $100+ Job Number: 2656-E
Duties will include conducting: Voltage Drops, Conduit/cable sizing. Termination design, Fault calculations,
Analysis for motor sizing/interchange, Energy optimization calculations, Electrical cost estimating, Project
inspection, and Vendor Bid evaluations.
Duties also involve: Coordinating design work with designeers, drafters and other engineers; Monitoring vendor
equipment testing at the factory for acceptance at field locations; Identifying, analyzing and resolving equipment
issues; Reviewing and approving design drawings, technical analysis, and/or construction specification for
quality, accuracy and completeness; Reviewing equipment installations and/or construction work in the field;
Documenting critcal equipment installed at various facilities; Monitoring Preventive Maintenance activities on
the pipeline system.
Salary: To 90's Job Number: 2656-D
Salary: $80's Job Number: 2656-C
Salary: $70"s Job Number: 2656-A
Salary: to $90's Job Number: 2656-B
Salary to: Mid $60’s. Job Number: 2264.
Salary: $60's. Job Number: 20980-B.
ENGINEER ONE, INC.
P.O. Box 23037
Knoxville, TN 37933
Fax: (865) 691-0110
Email: engineerone@engineerone.com